Victron Smart Shunt IP65 Case with lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Victron Smart Shunt IP65 Case with Lid for RV mounting on back of battery box
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Victron Smart Shunt IP65 Case is designed to be attached to the side of the battery boxes on an RV. The box is not meant to be water resistant given the shunt is IP65 rated. It is designed to project from elements to some extent. The ports on the sides are for wires to be fed into the box. The shunt can be screwed to the bottom but there are blocks in the bottom that create a snug fit. With the wires attached and weight of the shunt I see little need to fasten the shunt into the box at this point. There are drain slots on each end to ensure water does not stand in the bottom of the box.
There is a screw hole in the lid to secure it if needed.
Should be printed in PETG or other heat resistant materials.