Battery Monitor Housing for Junctek 600A Shunt Monitor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery Monitor Housing for Junctek KH160F with integrated plugs for Anderson Powerpole 175A & 45A connectors
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This housing is designed to contain:
1x - Junctek 600A Bluetooth Battery Shunt Monitor with RS-485 Display, Temperature Sensor, and Relay Control (KH160F-0-120V-0-600A)
2x - Anderson Powerpole 175A Connectors (Supply and Load Sides of Meter)
2x - Anderson Powerpole 45A Connectors (Supply and Load Sides of Meter)
I needed a battery monitor to measure cumulative power between my battery packs, loads, and chargers. Not needing a laboratory quality measurement tool, I found this Junctek product on Aliexpress. The sizing was chosen to exceed my amperage needs by at least 30% as a safety margin. (I needed to measure 400+A, so I bought a 600A capable meter)
This housing was not designed to include a relay for the low voltage cutoff, over voltage cutoff, etc. as I had no need for that feature. (If the bottom part were stretched in only Z axis, it could be made to fit the relay I believe)
Mine was printed in PETG at 30% Adaptive Cubic infill with 3 walls and .3mm layers to ensure it would last with me throwing it around.