1 / 5
Battery Monitor Housing for Junctek 600A Shunt Monitor — zdjęcie 1
1 / 5

Battery Monitor Housing for Junctek 600A Shunt Monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery Monitor Housing for Junctek KH160F with integrated plugs for Anderson Powerpole 175A & 45A connectors

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
373
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This housing is designed to contain:

1x - Junctek 600A Bluetooth Battery Shunt Monitor with RS-485 Display, Temperature Sensor, and Relay Control (KH160F-0-120V-0-600A)

2x - Anderson Powerpole 175A Connectors (Supply and Load Sides of Meter)

2x - Anderson Powerpole 45A Connectors (Supply and Load Sides of Meter)

 

I needed a battery monitor to measure cumulative power between my battery packs, loads, and chargers.  Not needing a laboratory quality measurement tool, I found this Junctek product on Aliexpress.  The sizing was chosen to exceed my amperage needs by at least 30% as a safety margin. (I needed to measure 400+A, so I bought a 600A capable meter)

This housing was not designed to include a relay for the low voltage cutoff, over voltage cutoff, etc. as I had no need for that feature. (If the bottom part were stretched in only Z axis, it could be made to fit the relay I believe)

 

Mine was printed in PETG at 30% Adaptive Cubic infill with 3 walls and .3mm layers to ensure it would last with me throwing it around.