Victron 500A SmartShunt Enclosure / Cover (IP21 & IP65)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects against accidental short circuits and physical damage.
- Ocena
- 0 / 5
- Polubienia
- 16
- Wydruki
- 0
- Wyświetlenia
- 1506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This Victron SmartShunt enclosure/cover protects against accidental short circuits and physical damage. Designed specifically for the 500A/50mV Victron SmartShunt (Bluetooth, without physical display) for a snug fit and optimal protection. Accepts wire of any gauge (AWG) coming out from the back of the shunt.
Compatible with
(affiliate links)
Installation
1. Remove the mounting screws and the wires/connectors from the shunt. Slide down the enclosure over the shunt:

2. Install the mounting screws and connect the wires to the shunt:

3. The cover uses friction-fit over the two M10 screws to stay in place:

4. To install the cover, simply slide it over the two M10 screws:

Filament
Shunts can get very hot so I recommend PC (polycarbonate) for high temperature resistance. And as it turns out, Polymaker makes a nice PC with Victron-like blue color so it's a no-brainer:
https://amzn.to/4aSYKY2 (affiliate link)
Print Settings
- 0.2mm layer height
- 2 Wall loops
- 0.5mm Outer wall
- 0.55mm Inner wall
- Arachne
- 100% Sparse Infill
- With support:

