1 / 3
Letter Embossed Bristle Brush Covers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Letter embossed bristle brush covers for easy identification of brush type (N for Nylon, B for brass, S for steel).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bristle Brush Covers
I have made bristle brush covers with an embossed letter on one side of the cover for easy bristle brush type identification (labeled N for nylon brushes, B for brass brushes, and S for steel brushes).
Please Note:
- The covers install properly only one way. The cover opening has two cavities, one smaller and one larger, separated by side bars that are offset of center to capture the small brush head. The bristles of the brush go into the larger opening. For the brushes I used to design the covers (see picture), install the cover with the letter facing upright and the brush bristles facing to the left. If installed incorrectly, the cover will pivot, which indicates improper placement.
- The fitment (e.g., ease/difficulty of installing/removing the covers) may vary depending on the manufacturer of the brush used (many brushes may appear to be the same but could have differences), printer tolerances, and other factors. Please see one of the pictures for the dimensions of the brush I used to design the covers.
Print Orientation & Settings:
- Nozzle: 0.4mm
- Resolution/Layer-height: 0.2mm
- Perimeters/Walls: 3
- Infill: 50+%
- Supports: Unnecessary if print orientation is appropriate (see one of the pictures for reference)
- Filament Type: PETG was used for test prints due to its somewhat flexible properties.