Components/Parts Chest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small drawer-based chest to store electronic components (or beads, I guess).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this for the random components that come in plastic/divided cases that I wish had a standardized form factor.
Limits: only has 12 divisions per drawer with a height based on the shell dimensions (see below).
Small drawer-based chest to store electronic components (or beads, I guess). 4 Drawers, each with 12 dividers and real estate to label.
Dimensions of whole unit: 106(width) x 89(height) x 183(length) mm
Dimensions of drawer: 99.5(width) x 19.5(height) x 180(length)
Dimensions of each organizational section: 43.13mm x 31.17mm x 18mm (h) (mind the chamfer that mitigates need for supports but encroaches on volume)
Size of label area: 31.17mm x 10.11mm (each width of label ledge spans the whole drawer[99.5mm] and 12mm labels seem to fit ok)
Little drawer pulls are designed to not require supports, hence their wonkiness. Print time with a conservative Klipper is around 3 hrs for the drawers and 11 hrs for the frame. Done at 0.2mm layer height, max travel 180mm/s, outer and inner walls @90mm/s. By all means, let your printer do whatever it wants. Done in PLA.