K1/Max/C/SE Tool Head Chain Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple riser for your K1 series printer to keep the chain from rising on the x rail.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1075
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update: 6/5/25 If you use this with a riser system, when installing it make sure it clears the riser and everything else. I noticed an issue that it was hitting my rider that has a spot for my light kit and it ruined that part of the light. I wound up removing and cutting about 2-3mm off and now it clears everything.
I was using the Cable Camel by NeedItMakeIt along with Booleans And Things K1 Max 10 degree Cable chain riser and it was still hitting the x rail. I wound up printing both in PLAF as I didn't have any ABS. so it's possible that was a reason. I was going to just extrude the cable camel to be taller but I figured why not just see if this simple design works. So far it doesn't hit that rail anymore.
You will need an M3x 30mm bolt along with a small washer. Do not over tighten so the cable chain can still pivot as designed.