1 / 4
Makerbot Spool Holder Adapter for Mendel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to bolt a Makerbot Filament spool holder(thingiverse.com/thing:7105) to the top of the Mendel Z-Rod's.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This allows you to bolt a Makerbot Filament spool holder(thingiverse.com/thing:7105) to the top of the Mendel Z-Rod's.
3/4/2012 - I've experienced some issues with my x-axis missing steps off and on with the spool mounted in the first orientation. Therefore, I designed some additional brackets to re-orient the spool to allow the filament to feed better. I broke up the bracket into two pieces so it can be printed on a TOM.
Instructions
- Print out this adapter
- Print out the spool holder: thingiverse.com/thing:7105
- Bolt the two pieces together using M3 hardware
- Bolt to top of the Mendel Z-Rod Clamps using 2 M4x40 Bolts. 3/4/2012 - I've experienced some issues with my x-axis missing steps off and on with the spool mounted in the first orientation. Therefore, I designed some additional brackets to re-orient the spool to allow the filament to feed better. I broke up the bracket into two pieces so it can be printed on a TOM.
Category: Other