Corner Sink Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little triangle that sits on the corner of your sink, where you can put sponges and other things to dry
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Really easy to print and assemble, this corner sink organizer is the way to go to organize and dry your sink utensil.
With a bottom incline to make water drip from its center into the sink.
Every thing can be printed easily with some tips:
- the sides must be printed standing up with a little brim on the outside
- all the corner printed laying down on the back so there's no need for support
- layer high for the corners 0.2 or 0.28; for the sides 0.28 the ones on the back, the front one can be printed at higher resolution for the pattern to be more precise. I personally printed everything at 0.28.
- the bottom piece should be printed at 0.2 or lower the get the water to follow the right path.
To be Printed:
- base
- front piece
- 2x back piece
- all three types of corner
I strongly suggest PETG for corners and bottom, the sides can be printed with PLA or PETG.
For a more special look I use plexiglass for the back sides. That's what shown in the photos. I printed everything on my Elegoo Neptune 4pro.