1 / 6
Corner Sink Organizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little triangle that sits on the corner of your sink, where you can put sponges and other things to dry
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Really easy to print and assemble, this corner sink organizer is the way to go to organize and dry your sink utensil.
With a bottom incline to make water drip from its center into the sink.
Every thing can be printed easily with some tips:
- the sides must be printed standing up with a little brim on the outside
- all the corner printed laying down on the back so there's no need for support
- layer high for the corners 0.2 or 0.28; for the sides 0.28 the ones on the back, the front one can be printed at higher resolution for the pattern to be more precise. I personally printed everything at 0.28.
- the bottom piece should be printed at 0.2 or lower the get the water to follow the right path.
To be Printed:
- base
- front piece
- 2x back piece
- all three types of corner
I strongly suggest PETG for corners and bottom, the sides can be printed with PLA or PETG.
For a more special look I use plexiglass for the back sides. That's what shown in the photos. I printed everything on my Elegoo Neptune 4pro.