Injection Nozzle Rack Supports for Steelco LAB 500L Washers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement injection nozzle rack supports for Steelco (Miele) LAB 500L lab glassware washers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
These are replacement parts for our Steelco Lab 500L glassware dishwasher, commonly used in scientific labs for cleaning glassware.
We tested PETG, but it's not temperature resistant enough. Resin printing was also tested, but the parts became very brittle after the first washing cycle.
The best results were obtained with a special temperature-resistant filament, “3dkTop” by 3dk.berlin, which requires tempering at 110°C after printing and has shown no deterioration after 10+ washing cycles. More filament details are available here: https://3dk.berlin/en/26-3dktop-heat-resistent (additional information in German, translation recommended).
Printed without support.