1 / 2
Injection Nozzle Rack Supports for Steelco LAB 500L Washers — image 1
1 / 2

Injection Nozzle Rack Supports for Steelco LAB 500L Washers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement injection nozzle rack supports for Steelco (Miele) LAB 500L lab glassware washers

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
48
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

These are replacement parts for our Steelco Lab 500L glassware dishwasher, commonly used in scientific labs for cleaning glassware.

We tested PETG, but it's not temperature resistant enough. Resin printing was also tested, but the parts became very brittle after the first washing cycle.

The best results were obtained with a special temperature-resistant filament, “3dkTop” by 3dk.berlin, which requires tempering at 110°C after printing and has shown no deterioration after 10+ washing cycles. More filament details are available here: https://3dk.berlin/en/26-3dktop-heat-resistent (additional information in German, translation recommended).

Printed without support.