6x3lever plus for Magnet Insertion Tool v2 from EmGI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for the lever with a hook to secure the rubber to not fall off
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool.
https://www.printables.com/model/1008467-magnet-insertion-tool-v2
The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No matter what rubber size I used - the rubber always jumped off his secure hook over time.
So I extended this hook to secure the rubber better.
Now the rubber stays in place and the Magnet Insertion Tool is working like a charm ;-)
Since I printed the version for 6x3mm magnets, the lever is also designed for this size (Don't know if the magnet size matters. Did not try any other sizes).
Big thanks to @EmGi for his great design!