Picatinny CO2 cartridge holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to bring 1 or 2 CO2 cartridge on a picatinny rail
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mix of the great design from FranckB to receive a CO2 cartridge.
I double it and bring the two on a picatinny receiver salvaged from SocksofGranduer.
This receiver is interresting because you can lock with a three-pin part rather than with a M-something screw. It's sure enough for most of the application.
I'm satisfied of this design because it is one hand operable to charge and discharge the cartridge as you can see on the picture. (Sorry for the green filament, it's an old PETG I use to prototype)
Please not that depending on your cartridge manufacturer, the holder will fit more or less tight (enough to maintain however). In my case, Umarex is tight and Swiis Arms has a looser fit)
I print it in the as-upload orientation. PETG, 4 perimeters is ideal but 3 is enough, something like 30/40% infill.
In a second time, I will make one with just on cartridge if someone is interested.
(And maybe one with a classical picatinny receiver, let me know if you're interested)