Anova Culinary Sous Vide Precision Cooker 3.0 Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a foot to hold your Anova Sous Vide machine. It can hold it for draining or storage with or without the pump…
- Ocena
- 1 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a foot to hold your Anova Sous Vide machine. It can hold it for draining or storage with or without the pump impeller cover.
Print Settings
Printer Brand:
Other
Printer:
AM8
**Rafts:**
No
Supports:
No
**Resolution:**
0.3mm
Infill:
20% (2 walls)
**Filament:** Overture PLA Gray Blue
Notes:
This was printed with a brim but that depends on how well your adhesion is. For me a brim is generally necessary. It was also printed with a .2mm layer height just because I'm impatient. A smaller layer height will give you a smoother slope on the foot. It was quickly designed in Tinkercad and is publicly available there with the same name. The main hole might prove to be a loser fit than you like so you might want to reduce it my 0.5mm or so. I also applied a Velcro cable management tie to the cord to keep the center or gravity over the foot for storage - although any way to bunch up the cord near the cooker will work.
Category: Kitchen & Dining