52 modeli
These are models that work as a replacement screw for the anova sous vide clamp that anova wants FOURTY UNITED STATES DOLLARS TO REPLACE. Luckily 3d printer owners can repair their own things right? There are 3 different models now, the…
If you are looking for the bracket that attaches the Anova to the water bath, see my companion design here: Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com The…
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of the sculpture 'Venus Italica' by Antonio Canova, originally uploaded by the…
I created this model because I have some coasters collected but if you want to print the coasters like the one on the render, here is a brief tutorial: First, add a cylinder and change the dimensions. Remember to click the padlock to…
Kaplanovy turbíny se využívají ve vodních elektrárnách s menšími až středními spády a relativně větším průtokem. Díky natáčivým lopatkám rozváděcího i oběžného kola ale dokáže pracovat se stejnou účinností i při sníženém nebo proměnlivém…
This is the companion part for Sous Vide Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com but it will also fit the original bracket that comes with your Anova. I designed it so that you…
A vertical stand for an Anova immersion circulator. This makes it easy to store it upright. It includes a little tray to catch any drips or hold the power cord. The clearances are a bit tight for the stand to fit into the base…
Print with TPU. They are very thin and flexible, can be worn in water, and provide a barefoot-like experience. They were custom designed for wide feet, ab size 39. You can scale them to your liking. The last picture was taken after a lot…
This design is made according to the paper model and created so it can be printed. If model is too big for your printer just use scale for all parts, but it is possible that detail will not be the same-for example for solar panels. Or it…
Remix of DTakehara excellent design to fit the newest model of the Anova Sous-vide cooker. Mine is a bit taller and has a cutaway for the pot clamp. Update: Added a version with my logo moved from the bottom to the top/rear of the stand…
This design is made according to the paper model and created so it can be printed. If model is too big for your printer just use scale for all parts, but it is possible that detail will not be the same-for example for buttons. Or it can…
I scanned this sculpture couple of years ago. I printed in very small size (7-8 cm tall) but I think in larger size you reach better quality. material: PLA infill: 15-20% support: Yes walls: 3* brim: yes *I used 2 wall lines but the…
Not much to say. Print it without supports, screw it to the wall. Done! Enjoy! OpenSCAD included as usual
This is a modification of abcnj's design, which mounts Anova at a higher point, allowing you to dip Anova deeper into your container. This way you need less water or can allow more evaporation before adding water. The ring will need some…
If you've broken it you'll know what it is. I printed this in PC blend for strength and temp resistance. It will need supports but they break cleanly on hidden surfaces
I created an adapter set for my Anova Sous Vide Bluetooth/Wifi cooker to use with my Coleman Stacker cooler. This is a three piece kit that has a screw on mechanism for the inside of the cooler, and two variations of the top - an open one…
Inspired by the design of dkallback (https://www.thingiverse.com/thing:2755862), I tried to improve the design, because I encountered some issues with the original design. Printed with ABS, the printed flange was very brittle and the…
Replacement knob for the Anova Precision Cooker. Print instructions Printed with 0.15mm layer height in PLA, but anything should work, really, as there are not too tight tolerances. Glued the knob, to keep a tight fit.
A support for Anova Culinary's immersion circulator to mount it to a Curver 10 liter cooler box. May fit other storage- or cooler boxes. There are two versions. One can be used as a separate support to adjust the height of Anova relative…
Vymodelováno ve FreeCADu.
Collar adapter for an Anova Pro Sous Vide stick on a Coleman Party Stacker 48 can. Sized to fit a 2.5" hole cut with a hole saw. Anova Pro is 2.37" dia. The collar makes up for the gap between the two and has a lip to hold the Anova in…
A vertical stand for the Anova Precision Cooker 3.0
I was not going to pay Anova a 4th of the price of a new cooker just for a tiny piece of plastic. Not an exact copy due to my lack of modeling experience. Can be printed without supports, it's bit steep, looks ugly, but it works. Feel…
This is a mount for the original Anova Precision Cooker on the 12l and 16l Container. I did not like the original screwable bracket so I have designed this plug-in bracket. Print upside down so there is no need for support. I printed this…
This remix is to allow a better fit on the Rubbermaid Commercial Space-Saving Container, 6-Quart Capacity (FG630600CLR). Added an small opening in the middle to allow for the container's support. Printed the modified part in red to show…
This design is made according to the paper model and created so it can be printed. If model is too big for your printer just use scale for all parts, but it is possible that detail will not be the same-for example for buttons. Or it can…
A sous vide cooker is an excellent way to help keep a room warm and humid. When my wife caught covid we used this to keep her comfortable during the cold, dry nights. The original Anova cooker has bright LEDs that cannot be turned off,…
Updated 5/11/2023 Modified Cap.f3d with parametric parameters to adjust the dimensions of the USB-C cord. The USB-C cable constantly falls out of my Airlock Nanovac Vacuum Pump so I designed this cap to hold the cable in place. I included…
I use a large food container to cook large cuts of meat (usually pork shoulders) and the walls of the container are pretty thin. When using the mount, it has to screw ALL the way in to make contact with the wall, and it just isn't able to…
This is a foot to hold your Anova Sous Vide machine. It can hold it for draining or storage with or without the pump impeller cover. Print Settings Printer Brand: Other Printer: AM8 **Rafts:** No Supports: No **Resolution:** 0.3mm Infill:…
A small, low-material print designed to organise the sealing clips and the Airlock Nanovac unit, as I was tired of constantly taking out and putting the unit into the box it came with. It also makes the unit easily accessible for sealing…
Often i need short patch cable in my network shelf. Now i 've always a handful on left side (if you mirror the model, you can also use it on right hand side) Category: Computer
The Anova Vacuum Chamber/Sealer uses a deep chamber to compensate for its compact size (relative to more traditional chambers). The deep chamber lets larger bags be folded over so that the open end doesn't extend past the sealer bar.…
I wanted a quick and dirty fix for my anova circulator. This one prints pretty quick and doesn't require supports or hardware. PETG is probably the minimally viable material, ASA, ABS, PC or PA are probably better longterm or higher temp…
I needed a new holder for my Anova Sous Vide stick and the original one I designed was intended for wall mounting. This one is designed to sit on the side of a regular 25cm pot.
Designed a 3D printable wall-mounted holder for the Anova Precision Sous Vide cooker. It's designed with very wide circumference and supports to make it extra strong as it tends to get a rough treatment in daily use. This is a V1 design.…
I lost one of the rubber feets and create a spare one. TPU Flex.
Qualche giorno fa mi sono accorto, che la parte dove si mette il sale eil pepe non rimaneva piu in posizione, ho iniziato a smontare la parte motore e mi sono reso conto che si era fratturata, ho realizzato una versione perfettamente…
I created this model because I have some coasters collected but if you want to print the coasters like the one on the render, here is a brief tutorial: First, add a cylinder and change the dimensions. Remember to click the padlock to…
I wanted to have an insulated top for mounting my Anova Sous Vide while cooking larger cuts for long periods of time. I grabbed a Sketchup model of a Coleman cooler to illustrate what I mean, but using the template you could mount this in…
Recommend print settings Material: something a little more temperature tolerant like PETG or ABS (not PLA). Supports: enabled Variable layer height? I printed this with 0.3mm layers up until the clasp, reduced to minimum layer height to…
This is a simple modern plant pot that matches all homes and designs.
3D printable topographic miniature of Vilanova i la Geltrú - 🇪🇸 Spain Capture the beauty of Vilanova i la Geltrú 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
Mark 19/18 Tiger/Casanova Inspired Iron man Helmet Enjoy Category: 3D Printing
V každém ze souborů jsou “čtverečky” s rozdílnou velikostí “stran”. Dbejte na tisk ve správné velikosti, protože na každém “čtverci” je vyobrazena délka jeho “strany”.
This is a cool air intake for the anova BT to hopefully avoid drawing in warm wet air from the pot into the electronics. In a few preliminary tests it seems to help avoid condensation and provide cooler, drier air to the intake, but I…
Have you ever tried to Sous Vide with the Anova in a Yeti Cooler? I have and it doesn't work. This buffer model adds a little width to the clamp so that you can hook it to the edge of your Yeti Cooler. The tolerances are pretty tight so…
A holder for the Anova stick Sousvide A holder designed to be airtight around the stick keeping the steam inside the box, while upholding the airflow for the device. Attention!! Needs to be printed in PETG or some plastic with higher…
I wanted to have an insulated top for mounting my Anova Sous Vide while cooking larger cuts for long periods of time. I grabbed a Sketchup model of a Coleman cooler to illustrate what I mean, but using the template you could mount this in…
Multicolor license plate frame I made for a buddy of mine. Nozzle .4mm Layer height .2mm PETG for heat resistance
