Anova sous vide circulator to coolerbox adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support for Anova Culinary's immersion circulator to mount it to a Curver 10 liter cooler box. May fit other…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A support for Anova Culinary's immersion circulator to mount it to a Curver 10 liter cooler box. May fit other storage- or cooler boxes.
There are two versions. One can be used as a separate support to adjust the height of Anova relative to the water surface. It may be glued to the box cover if wanted.
The second version consists of 3 parts. One goes below the cover, one in the middle and one on top of the cover, and it can be attached using bolts and nuts.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Notes:
I printed using black Ultimaker PLA.
Post-Printing
For the first version, I drilled a 62mm hole to the cover of the cooler box. Anova shaft is 60mm, but the 62mm hole saw was the closest in size that I had. Then I glued the riser part on it with cyanoacrylate glue.
For the other version, I also drilled a 62mm hole (and four 5mm mounting holes) and bolted it on the cover of the cooler box.
So far have done three of these for family and friends who have Anova circulators and I haven't encountered any issues.
Category: Kitchen & Dining