Anova Precision Cooker Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the design of dkallback, I tried to improve the design, because I encountered some issues.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 2
- Wyświetlenia
- 371
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Inspired by the design of dkallback (https://www.thingiverse.com/thing:2755862), I tried to improve the design, because I encountered some issues with the original design.
Printed with ABS, the printed flange was very brittle and the layers starts delaminating. So I created a thicker version of the flange.
The sharp edges of the thread aren't easy to print and they are also really brittle. I created some kind of trapezoidal thread, to solve this issues. I also created a rounded version of the thread, like knuckeled thread, but not exactly.
The nuts are already scaled up to 102%, which is absolutly perfect for my printer. You can scale it up/down in x- and y-orientation, if needed.
Print Settings
Printer:
SparkCube
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
50%
Filament:
Notes:
I printed the flange and the nut with 50% infill and 3 outher shells to ensure good robustness.