Anova Precision Cooker Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the design of dkallback, I tried to improve the design, because I encountered some issues.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 2
- Views
- 371
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Inspired by the design of dkallback (https://www.thingiverse.com/thing:2755862), I tried to improve the design, because I encountered some issues with the original design.
Printed with ABS, the printed flange was very brittle and the layers starts delaminating. So I created a thicker version of the flange.
The sharp edges of the thread aren't easy to print and they are also really brittle. I created some kind of trapezoidal thread, to solve this issues. I also created a rounded version of the thread, like knuckeled thread, but not exactly.
The nuts are already scaled up to 102%, which is absolutly perfect for my printer. You can scale it up/down in x- and y-orientation, if needed.
Print Settings
Printer:
SparkCube
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
50%
Filament:
Notes:
I printed the flange and the nut with 50% infill and 3 outher shells to ensure good robustness.