1 / 8
openBulletFeeder - 6.5 Creedmoor Collator Flip Plates
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber, but I have not tested it beyond 6.5.
This works with my 6.5 Collator Plate https://www.thingiverse.com/thing:3547180
These are designed for a friction fit, if too tight take a file along the edges that make contact with the feeder.
There are 2 options:
- One you can adjust your own angle using 12 gauge wire, this is a piece of from 15a 120V AC home wiring, works great, very simple to adjust.
- The other has a built in printed ramp to flip.
- 0.1 layer (Give a smoother surface and helps with the 45 print angle on the ramped version)
- 0.4 nozzle
- 4 Side perimeters
- 3 top/bottom perimeters
- 20% Infill
Bullet Collator Files https://www.thingiverse.com/thing:4140331
Category: DIY