1 / 8
openBulletFeeder - 6.5 Creedmoor Collator Flip Plates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber,…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber, but I have not tested it beyond 6.5.
This works with my 6.5 Collator Plate https://www.thingiverse.com/thing:3547180
These are designed for a friction fit, if too tight take a file along the edges that make contact with the feeder.
There are 2 options:
- One you can adjust your own angle using 12 gauge wire, this is a piece of from 15a 120V AC home wiring, works great, very simple to adjust.
- The other has a built in printed ramp to flip.
- 0.1 layer (Give a smoother surface and helps with the 45 print angle on the ramped version)
- 0.4 nozzle
- 4 Side perimeters
- 3 top/bottom perimeters
- 20% Infill
Bullet Collator Files https://www.thingiverse.com/thing:4140331
Category: DIY