openBulletFeeder - 6.5 Creedmoor Drop Tube Big Switch Small Spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder, https://www.thingiverse.com/thing:2504314, The one included in the project has the wrong ID of 0.258.
I have corrected the ID, removed the unnecessary view window (you can still see inside , 2nd pic), which made the part much weaker and adds more supports, I also strengthened the switch tabs, the other ones would break when removing PETG supports.
- 0.2 layer, 0.6 nozzle
- 20% Infill
- Perimeters- 3 top/bot, 2 vertical
- Use a brim for PLA, good PETG won't need it.
Place a piece of wood in between the switch brackets and use a small punch to remove the supports from the slots.
- "#"4 3/4" Screws & Nut https://smile.amazon.com/gp/product/B07CKLNR2T/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 https://smile.amazon.com/gp/product/B078N22ZGZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Large Switch & Small Spring https://www.doublealpha.biz/us/mr-bulletfeeder-dropper-switch https://www.doublealpha.biz/us/mrbulletfeeder-output-spring-and-extension-adaptor Print Settings
Rafts:
No
Supports:
Yes
0.2
Infill:
20%
Category: DIY