openBulletFeeder - 6.5 Creedmoor Drop Tube Big Switch Small Spring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder,…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder, https://www.thingiverse.com/thing:2504314, The one included in the project has the wrong ID of 0.258.
I have corrected the ID, removed the unnecessary view window (you can still see inside , 2nd pic), which made the part much weaker and adds more supports, I also strengthened the switch tabs, the other ones would break when removing PETG supports.
- 0.2 layer, 0.6 nozzle
- 20% Infill
- Perimeters- 3 top/bot, 2 vertical
- Use a brim for PLA, good PETG won't need it.
Place a piece of wood in between the switch brackets and use a small punch to remove the supports from the slots.
- "#"4 3/4" Screws & Nut https://smile.amazon.com/gp/product/B07CKLNR2T/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 https://smile.amazon.com/gp/product/B078N22ZGZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Large Switch & Small Spring https://www.doublealpha.biz/us/mr-bulletfeeder-dropper-switch https://www.doublealpha.biz/us/mrbulletfeeder-output-spring-and-extension-adaptor Print Settings
Rafts:
No
Supports:
Yes
0.2
Infill:
20%
Category: DIY