Phone/Tablet/Nintendo Switch stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a phone stand that ended up working nicely as a Nintendo Switch stand as well.
- Ocena
- 4,833 / 5
- Polubienia
- 131
- Pobrania
- 1075
- Wydruki
- 10
- Wyświetlenia
- 3908
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I made a phone stand that ended up working nicely as a Nintendo Switch stand as well. I wanted something that had plenty of clearance to allow a device to be plugged in without putting too much stress on the cable or the plug outlet on the device.
I have a Google Pixel 3XL with a big beefy Otterbox case and it suits it just fine. The stand is wide enough to not be easily knocked over.
The U-shaped notch on the back is for Popsockets.
It will need supports for obvious reasons.
I print them with 10-15% infill.
I superglue a thin piece of EVA foam on the bottom to prevent slippage.
Print instructions
Category: Gadgets