AstroHopper mount for the Hadley Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple universal phone holder for the Hadley Telescope, makes Astrohopper easy to use.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 49
- Wydruki
- 2
- Wyświetlenia
- 567
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I made this universal phone holder for the Hadley 3D-printed telescope, to make it easy to use Astrohopper for finding celestial objects.
It slides onto the middle section of the telescope and sits fairly secure without the use of any nuts or bolts. It takes under one second to attach or remove the holder.
Use the pins to secure your phone, print out plenty. You don't want to cheap out on pins and you might want to use some CA-glue to make sure they don't fall out.
You can also make your own pins, the holes are 5mm in diameter and its 9mm between the center of each hole. The two uploaded pins/cam-pins have a pin-diameter of 4.8mm.
Max phone dimensions are: 173mm x 83mm, so it should work with phones as big as the Samsung S24 Ultra and iPhone 16 Pro Max
The phone in the pictures is a OnePlus Nord 4 with a case (166.6 x 79 x 10 mm)
8mm clearance to any bolt head.