HeyGear Relfex RS Side drainer (closing lid mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Non permanent side drainer offset to be able to close lid for HeyGears Reflex RS. Update V2
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 746
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This Model was remixed from the original designer @sciartist_1982253.
This remix was made so you can close the lid while you let the resin drip. This way one can leave without having to worry about any particles falling into the Resin.
One could also simply use this to store the platform if one does not want to attach it to the print arm.
The orignal file was created as a non permaent solution to avoid using screws. This way no additional weight will be mounted to the built plate.
You can see in the 2nd picture a photo made though the closed hood.
UPDATE:
Due to bending of the model because of the offset, i tried to make it more rigid. Check File V2.
Please have mercy since i am new to blender and i am still learning i know that the model is not perfect and could probably use a complete redesign which am not capable of in Blender atm.
BE AWARE!!
Do not move the z axis arm before removing the build plate from this mod. Collision could happen when you move the z-arm down.
To use always lift the plattform to the highest point after print.
Always remove this mod before starting to printor doing any movements!!!