MacBook 30W Charger Holder/Wrap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original & Cool MacBook 30W Charger Holder
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 185
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to create something original, small, sturdy and good enough to not only carry both the charger and the cable together but do so without increasing the thickness normal to the large flat area of the charger. I also wanted to avoid any corners that stressed the cable when being winded with too much tension.
This design only needs supports at the bottom of the pocket for the MagSafe.
I added curvatures without exceeding 45° angles in order to be able to be printed without supports.
Filament Used: Overture PETG Green Lime
Infill: 10%
Quality: 0.20mm
Seams: Random
Updates:
v1: Initial Release
v2: Rounded corners and added slot for USB-C side at the back.
Show me your prints!