Odroid H4 NAS Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your Odroid H4 Plus into a sleek ventilated NAS box with effortless drive mounting and a tidy 3D-printed case!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Looking to turn your Odroid H4 Plus into a slick little NAS box? Look no further! This 3D-printed case snugly houses the board, provides decent airflow, and has built-in spots for drives—all while keeping everything nice and tidy.
Printing Tips:
• I recommend using a sturdy filament (like PETG or ABS) if you plan on having this case run 24/7—just to handle the potential heat load better.
Once it’s printed, slap in your Odroid H4 Plus, attach your drives, and close it all up. That’s it—you’re all set to enjoy your self-built NAS. If you have any questions or ideas on how to improve this design, let me know! I’m always up for feedback. Enjoy your new storage setup!