HSW Holder for Wera Micro Screwdrivers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Individual holders for the Honeycomb storage wall and Wera Kraftform Micro Screwdrivers
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 197
- Wydruki
- 4
- Wyświetlenia
- 681
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Individual holders which can be staggered, allowing you to print as many as you need (I have a kit of 7, which no other models exist for). Inserts are compact, so you can stagger them as shown in the picture for a more dense layout. Made so that you only need to lift the screwdriver a little bit before removing it, so that you don't need several inches of dead space above them on your HSW wall.
Print flat without supports. The 7 shown took 30 minutes on an X1C. These are friction-fit into HSW inserts. Should fit any drive/bit Wera micro screwdriver.