1 / 4
Garmin Striker 4 plus Hobie Through Eye Wiring Hole Mount — zdjęcie 1
1 / 4

Garmin Striker 4 plus Hobie Through Eye Wiring Hole Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Garmin Striker 4 plus Hobie Through Eye Wiring Hole MountSimply undo the through hole wiring grommet, replace with…

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
559
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Garmin Striker 4 plus Hobie Through Eye Wiring Hole Mount

Simply undo the through hole wiring grommet, replace with this - feed the cables up thorugh the holes in the adapter, add some silicon or other sealant to keep the water out, and mount your striker 4 directly above.

Also see the lowrance ready bracket adapter I remixed https://www.thingiverse.com/thing:6846572 for a full no-modification add on to your Hobie Outback pre 2015 (and probably others too).

Supports not required, but print using high infill, as the parts come under a fair bit of stress. Also found that a smaller layer height was needed to get the threads to come out well on the nut (but strangely not the base).

Credit to thekroko for the base mount!

Category: Other

Tagi