Carpenters Pencil Sheath
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you are as forgetful as I am, you probably set your pencil down somewhere and spend 5 minutes to find it again.
- Ocena
- 4,5 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 2
- Wyświetlenia
- 103
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a sheath for standard carpenters pencils. If you are as forgetful as I am, you probably set your pencil down somewhere and spend 5 minutes to find it again. With this sheath, your pencil will be within reach because you have a convenient place to put it after marking. The sheath has a large clip on the outside to securely hold it into your pocket and a small clip on the inside to retain the pencil. The enclosed end prevents getting graphite on your clothes and gives a satisfying click when you sink the pencil.
I printed it from PETG, but other filaments would probably work too.
It was designed not to need support material, and I recommend turning supports off so that the retention clip does not get clogged.