Carpenters Pencil Sheath
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you are as forgetful as I am, you probably set your pencil down somewhere and spend 5 minutes to find it again.
- Rating
- 4.5 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 2
- Views
- 103
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a sheath for standard carpenters pencils. If you are as forgetful as I am, you probably set your pencil down somewhere and spend 5 minutes to find it again. With this sheath, your pencil will be within reach because you have a convenient place to put it after marking. The sheath has a large clip on the outside to securely hold it into your pocket and a small clip on the inside to retain the pencil. The enclosed end prevents getting graphite on your clothes and gives a satisfying click when you sink the pencil.
I printed it from PETG, but other filaments would probably work too.
It was designed not to need support material, and I recommend turning supports off so that the retention clip does not get clogged.