1 / 10
The never sleeping 2 in 1 ergonomic tamper set in various sizes — zdjęcie 1
1 / 10

The never sleeping 2 in 1 ergonomic tamper set in various sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eye shaped, ergonomic palm tamper (tamper sizes: 48mm, 49mm, 50mm, 51mm, 58mm) with hidden DIY distribution tool

Ocena
0 / 5
Polubienia
9
Pobrania
15
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Let this tamper eyeball observe your coffee corner. When held in one hand, the eye is even movable from the back → Fun in the coffee corner guaranteed! :D

  • Hidden distribution tool (wdt),  (glue and needles/thin metal rods or thin spring steel required, 1-2 mm ⌀ )
  • Countless Color combinations
  • Coaster for cups and tampers with a bottom surface diameter of 58mm
  • The ball like grip distributes the pressure evenly on your palm
    • → generate more pressure
    • → better grip
    • → less damage compared to other hand held tampers

 

Print settings

  • Support: no
  • min. Perimeters: 3
  • Infill: 5-30%

Content/Files

  • Base + Grid (collects rest coffee grounds from bottom tamper surface)
  • Eyeball (main tamper component)
  • Distribution tool (Iris & pupil)
  • Hood (shell) 

Sizes

The base + grid, the shell, as well as the broom are uniform with all eyeball sizes. So you only need to choose the right eyeball tamper size.

Espresso MakerTamper Size (mm)Files to choose (.stp)
  • Mr Coffee Espresso Machine
48
  • eyeball_48mm
  • Pasquini
49
  • eyeball_49mm
  • Faema
50
  • eyeball_50mm
  • Breville Delonghi
51
  • eyeball_51mm
  • Gaggia
  • Elektra
  • La Marzocco Linea
58
  • eyeball_58mm

Source: https://lux-haus.net/blogs/coffee/espresso-tamper-size (18.03.25)

 

WDT Assembly: Distribution tool (Iris & pupil)

The 1 mm holes are 1 mm in CAD, but appear smaller when printed, you know the deal.. My other needles were too thick, but i'm sure if you torch the tip of regular needles, they will just glide in.

I provided a version with 2 mm holes as well - it's totally up to you printer tolerances..

Needed components:

  • 9 needles
    • max. length: 50 mm
    • min. thickness: ca. 0.4 mm
    • max. thickness: ca. 1.8 mm
  1. Poke the needles through the holes in the iris
  2. Use Play dough, hot glue or other glue to hold the needles in place
  3. Close the iris with the pupil
  4. Put everything together and get ready for a perfect extraction. Cheers! ;)

 

 

Tagi