WAGO Dispenser for 221
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A practical connector dispenser for the WAGO 221 with a belt holder or with a magnetic base.
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 182
- Wydruki
- 3
- Wyświetlenia
- 2807
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A practical connector dispenser for item numbers 221-413, 221-423 or 221-483 with a belt holder or with a magnetic base (5 mm x Ø 18 mm).
Assembly is performed as shown in the figure:
1 Position the housing.
2 Insert the belt clamp through the lever.
3 Insert the locking device.
4 Insert all the parts into the housing.
5 Secure it using the sample connector holder.
6 Optional: Use a sample connector.
7 Fill the housing with connectors and set the cover in place.
8 Optional: Insert and attach a magnet to the bottom of the housing.
• Material: PLA
• Extrusion width: 0.4 mm
• Layer thickness: 0.1 mm for cover, all others 0.2 mm
• Infill: 20 %
• Bottom fixed filler layers (bottom layers): 5 layers
• Upper fixed filler layers (top layers): 7 layers
• Support structure: Only required for sample connector holder and belt-clamp recess
Check out the design on WAGO Creators