WAGO Dispenser for 221
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A practical connector dispenser for the WAGO 221 with a belt holder or with a magnetic base.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 182
- Makes
- 3
- Views
- 2,807
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A practical connector dispenser for item numbers 221-413, 221-423 or 221-483 with a belt holder or with a magnetic base (5 mm x Ø 18 mm).
Assembly is performed as shown in the figure:
1 Position the housing.
2 Insert the belt clamp through the lever.
3 Insert the locking device.
4 Insert all the parts into the housing.
5 Secure it using the sample connector holder.
6 Optional: Use a sample connector.
7 Fill the housing with connectors and set the cover in place.
8 Optional: Insert and attach a magnet to the bottom of the housing.
• Material: PLA
• Extrusion width: 0.4 mm
• Layer thickness: 0.1 mm for cover, all others 0.2 mm
• Infill: 20 %
• Bottom fixed filler layers (bottom layers): 5 layers
• Upper fixed filler layers (top layers): 7 layers
• Support structure: Only required for sample connector holder and belt-clamp recess
Check out the design on WAGO Creators