Pop'n Music Controller multi color full size

The controller has been entirely printed with only 1 extruder at 0.20 on a Prusa MK4S

For the multicolor print I used this tutorial: Multicolour printing with one hotend - RepRap

Of course you can also print it in mono color if you like the structure.

TIps:

The multicolor parts have been designed to be printed at 0.2 and occupy the first 2 layers.

To get bright colors from the third layer of the blue color, use the color white.

The “side” parts must be printed lying down with support.
 

Differences from the single-color version:

• precise distance between vertical keys.
• More space to connect cables.
• More space to connect LED cables.
• Smaller, easier-to-print parts.

The model consists of the following parts:

• 1 ( 5 colors )
• 2 ( 5 colors )
• 3 ( 5 colors )
• 4 ( 6 colors )
• 5 ( 5 colors )
• 6 ( 6 colors )
• 7 ( 6 colors )
• 8 ( 5 colors )
• 9 ( 5 colors )
• H ( 10 piece print )
• center a ( 2 piece print )
• center b
• angle a ( 2 piece print )
• angle b ( 2 piece print )
• side a
• side b
• side c ( 2 piece print )
• side d ( 2 piece print )
• side e ( 2 piece print )
• bottom a ( 4 piece print )
• bottom b ( 2 piece print )

You will also need to:

• 1 x Arduino Leonardo or generic zero delay controller
• 1 x Cable Male to Micro USB
• 1 x Type D connector
• 1 x Cable USB Type A/Male to A/Male 
• 9 x 10 cm ( 4 inches ) Arcade buttom ( 2 X white, 2 x Yellow, 2 x green, 2 X ble, 1 x red ) 
• 6,3mm ( 0.250in ) Crimp connectors to L
• 4,8mm ( 0.187in ) Crimp connectors
• 124 x M3 x 25mm Screws
• 100 x M3 Nuts
• 24 x Heat-set inserts
• Wire various colors

Assembly instructions:

Look at the images with indications of where to place the various parts

1. combine parts 2, 4, 6, 8
2. combine parts 1, 3, 5, 7, 9
3. Merge the previous parts using the H parts
4. mount center a and center b
5. Assemble the sides and corners
6. Install Heat-set inserts
7. Install the Arcade buttons and make the various connections.
8. Assemble the bottom
9. Have fun with your Pop'n Music controller