M6 to M5 bowden reducer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for m6 pc4 connectors to act like m5! 14mm nut boss = wrench tight pc4, finger tight extrudes!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
V2: Added a chamfer to the end of the M6 slot and then added a fillet to the inner filament route. It would take a few tries to get it passed the galleries when quick swapping filaments. Now its functions smoother.
I bought a pack of pc4 connectors to realize they were M6 threaded. So, I made an adapter to fit the M5 threads. I threaded the pc4 into place then, removed it out to clean any loose materials. Just double check that the filament runs thru smoothly before you attach the ptfe tubing. works for 1.75mm filament!