IKEA Jetström (or anything else that needs it) distances
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two very simple distance rings to create space for a cable and make the light level if using custom holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I bought two IKEA Jetström ceiling lights for the kitchen. Unfortunately, there is no good way to get the cable to an ordinary outlet out of the box, the device is made to put on top of a cable.
I also wanted to reuse the old holes in the ceiling which means that the raised holes in the Jetström did not fit for two out of four holes.
This is a quick solution for the problem, the tallest ring (10 mm) is used for distance between the ceiling and the custom holes in the light, and the shortest ring (6 mm) is for the original raised holes. The light can be mounted level, and there will be space for a cable.
Print on any setting that makes the thing hold together, no special requirements.
Not a rocket science model, but in case it helps someone, here it is.