Miniature Flamingo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature flamingo, perfect for putting in plants.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 644
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you ever thought to yourself that your plant looks a little lonely? Maybe that dead plant you sitting in the corner could use a pop of color to hide the dead leaves and brown stem. The solution? A miniature flamingo! Inspired by those fantastical plastic lawn flamingos, this little guy is a friend in miniature. Whether it's for a plant or your actual lawn, this little friend may just bring you many smiles.
Happy crafting and flamingo creation, my friends!
Additional Notes:
• The holes in the bottom fit 1.75mm filament which are used for the "legs". No glue is required.
• I used Apple Barrel Matte "Bright Yellow" and "Black" acrylic paint for the beaks and eyes in the models shown above. The models were sprayed with a glossy clear coat to make them look more "plastic" though this is not a necessary step.
• Supports are a MUST for the beak! However, you do not need to support the holes in the bottom.
• Please note that in testing, the beak would break off the supports at 0.1mm layer height. When increasing the height to 0.15mm (and even 0.2mm) the beak did fine.
• Additionally when printing the "Support Top Distance" in Cura was set to 0.0mm. The supports were still easy to remove and the print required only a little additional cleaning.