Hegemony Advanced Automa Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiered card holder for the action priority cards and policy priority cards from Hegemony's Advanced Automa.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The advanced automa cards for Hegemony take up a LOT of table space. This is particularly true when playing with more than one automa. As such, I decided to make a tiered card holder with a relatively small footprint that can be used for the action priority cards and policy priority cards.
I store the set aside policy priority cards and the voting token in the top slot. Each slot is 2mm wide; a slot can hold four stacked cards with 90 micron sleeves. You can have more cards in a given row when they are partially overlapping.
Print 2 card holders per automa. No supports required.
Print Settings (other settings should work fine)
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 15%