Hegemony Advanced Automa Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiered card holder for the action priority cards and policy priority cards from Hegemony's Advanced Automa.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 396
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The advanced automa cards for Hegemony take up a LOT of table space. This is particularly true when playing with more than one automa. As such, I decided to make a tiered card holder with a relatively small footprint that can be used for the action priority cards and policy priority cards.
I store the set aside policy priority cards and the voting token in the top slot. Each slot is 2mm wide; a slot can hold four stacked cards with 90 micron sleeves. You can have more cards in a given row when they are partially overlapping.
Print 2 card holders per automa. No supports required.
Print Settings (other settings should work fine)
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 15%