1 / 4
Drill Sharpening Jig 170°x10° (45°) test rig for 3.5mm bone drills
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not for normal drill bits. A draft of a sharpening jig, incorporating non-standard angles, for drilling bone and ivory.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You should probably change these settings!
The .3mf file contains VLH, temperature, & fan cooling settings for PETG.
It is set up for a draft print, on a GEEETECH FDM printer, with 0.8 nozzle.
We THINK these angles will work for this particular bone drill we have. But it's very much a test at this time.