Liczymy pasujące modele…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Since it can be tricky to accurately hold a block plane’s blade or a chisel correctly for sharpening, this honing guide is designed to help. A chisel should start with one bevel, which is formed on the blade, usually by grinding it at a…
Wydruk około 6,21 €–7,59 € nettoWstępna wycena jednego wariantu
Jig for sharpening of chisels, plane irons and similar. Print instructions: Material: PETG (PA, PC might be a good fit too) Layer height: 0.2 (0.15 should work fine too) Baseplate: Infill: 15% - 20% Honeycomb Perimeter: 3 Top: Infill: 70%…
Wydruk około 4,62 €–5,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tips are appreciated and go towards creating new designs There are a number of bevel gauges that can be bought for very reasonable prices. These tend to cover a select set of bevel angles which are most commonly found on various tools,…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Store 1” wide by 18” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Protection sleeve for a 2 sided diamond sharpening stone. The diamond Sharpening Tool: https://www.amazon.de/dp/B07WJJLFMX?th=1
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Description Drill Bit Sharpening Attachment for Angle Grinders – a simple and practical tool for sharpening metal drill bits using an angle grinder. This drill bit sharpener is designed to work with many popular angle grinders. Simply…
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Need help finding that exact sharpening angle? These are helpful when you suck at sharpening. (sorry the photos are of them on my old anet a8) EDIT: Fixed an issue where the number were not attached to the blocks.
Fully Metric Remix of "Better Chisel Sharpening Jig" by @GarageTimeDavid_3790 Changes: Adjusted hex holes from ¼" (11.1125 mm) to 10 mm to fit M6 bolts Adjusted round holes from 8.4 mm / 6.4 mm to 8.0 mm / 6.0 mm respectively
This is a remix of the metric remix by @energeticinterpretation44 of the original model by @GarageTimeDavid_3790 All I did here is to enlarge the M6 holes slightly so that M6 bolts have proper clearance. All kudos to the original makers.
Original model worked great, but I don't have 606ZZ ball bearings and needed metrical clamps. So here is a remix working with two 608 bearings (print the Roll.stl twice and glue them together). Additionally I made some versions of the…
This is a jig for sharpening drill bits to 4 facet on a vater grindstone. Makes perfect 4 faset drill bits. Custom Section Category: Tools
Knife sharpening angle guide with 15, 18, 20 and 22 angle
Carpenter Pencil Sharpener and Offset Block Easy forming a perfect sharp tip on your Carpenter Pencil can also be turned around and use it as an offset Block.
I liked @William_223753 models but wanted a 17 degree version. I wipped one up in Fusion 360 and this is the result. I made the model from scratch but the design is a copy of William's work. I hope you find it useful. I printed on the…
Note that this is for skewed chisels (as used by woodworkers for cleaning out dovetail sockets etc), not skew chisels (as used by woodturners). Skewed chisels ( like these ones ) have a single bevel at a steep angle and make it much…
Einhell axxio 18/125 drill sharpener 135 degree and relief 10 degrees. Feel free to remix - f3d file is added. Remember to wear the protection glasses and use your head ;)
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
Unfortunately, the blade of the plane has become dull. I found similar sharpening tools, but I didn't like either the angle of the sharpening or the way the blade was held. I designed one that would hold the blades at a 40 degree angle…
Made this to hold the cheap but effective SATC Premium Diamond Sharpening Stone that you can find on Amazon. It's the 400/1000 grit plate. The measurements on amazon say it's 7.8 by 2.75inches, but it's a little off. I made this so that i…
Easy to print. No supports needed but you might need a brim (depends on your printer). You probably need to turn the models in your slicer in order to print with no supports!
Simple jig. Use M3 screws on top, and an M8 screw and 608Z (or similar) bearings.
I have a small thicknessplaner and had the great idea to plane oak endgrain. It worked, but now the knifes a dull. New knives are 25€, sharpening almost free. I looked on the Internet how to sharpen theses blades and i found a cool…
Hardware needed: (2) ¼"-20 X5/8" machine screws (2) ¼" washers (2) ¼"-20 square nuts (4) 4mm x 18mm bolts with nuts (4) 4mm knurled threaded insert nuts There are 3 files so far. One does not have a lip and allows you to adjust the…
Supports the arm holding the blade, to resist vertical motion from force applied when sharpening.
This is a simple sharpening jig with a 30 degree angle for planer blades and similar objects. Blade can be clamped down with an M5 screw and a suitable nut. Assemble and use as shown in the picture.
Did a in my opinion better handle with a horizontal spring load instead of the squeezing in and screw in back fit. It also helps with slightly different length and shapes of the stone, for the original one I had to file mine a bit to fit…
Here is a knife and scissors sharpener. This version enhances the gimbal. A linear bearing (LM10UU) is now holding the aluminium rod. No more play, motion is smooth and perfect. All the other parts of this sharpener are strictly the same.…
Intro: This an angle jig for your chisel or planer knife sharpening. It works best with the triangle shaped honing guides that you can find in most stores. I've attached of the picture of the one I designed it around. The flip stops are…
hey this is my knife sharpening jig. it holds a knife in place with magnets while sharpening. there are 3 variants (15°, 20° and 25°) you will need 2 m3x10mm bolts and 2 m3 nuts as well as 5 10mmx3mm magnets. it is best to lubricate the…
Encase your wedge-shaped pencil sharpener for more convenient use in a workspace. Required Hardware This holder can adapt to a variety of single and double blade sharpeners. The sharpener must be a wedge or block shape , with 2 sets of…
I found the original model lacklustered. The holders did not have 8mm holes for the rod. The extrusion parts where hard to fit. The clamping mechanism was lacking options and the holders had lefthand threads probably due to a mirroring of…
A guide (2 actually) for sharpening the end of a carpenters pencil. One version has a curve and is best used with a scalpel or snap off blade, the flat version can be used with most tools, a trimming knife or a chisel. Print in the…
Stones number: 9 Stones size: typical 23*170mm Support creator here: PayPal me :) Patreon
For good stability I printed with 3 perimeters and 20% gyroid infill.
Sharpy McSharpface Precision symmetrical sharpening system for consistent and repeatable, razor-sharp edges. Two rods leading sharpening stones are mounted on a trapezoid leading right-left screw for precise and symmetrical angle…
This cover goes on a stand for the Horl 2 from https://www.printables.com/model/661912-stand-for-horl-2-sharpener-and-premium-sharpness-s/remixes and holds the various components in place to prevent them from rattling around inside. It is…
Why This Adapter The original adapter that holds the jaws allows sharpening angles between approximately 15° and 30°. This shorter adapter adds an extra 5°, enabling sharpening of knives with angles up to 35°. I primarily made it for…
Drill bit sharpener for small grindstone grinder. If you like it, please donate: Paypal: [email protected] Skrill: [email protected] ★ Thank you! ★ Print Settings Printer Brand: TEVO Printer: Tarantula **Rafts:** Doesn't…
A drill sharpening gauge to ensure correct cutting edge angle and that edge lengths are equal. Equal edge length is vitally important for drilling true and to true size. The gauge is designed to accept a 150mm (6") steel rule. My rule…
This is an upgrade for the cheap Carpenter Pencil Sharpeners. The model has much space for shavings. You have to scale the lid to 102% to properly screw onto the container. Then use some CA-glue to glue the sharpener into its hole. My…
a holder for a commonly available 6"x2"x3/4" sharpening stone (the real dimensions of the stone slightly under size) , it holds the pictured stone snuggly but it is easy to pull out to clean or reverse. if you are using a different brand…
Holder for diamond sharpening stone stone size 170x75mm Infill 15 wall 3 no support
Rubber handle went all nasty and melty on you? Yeah, I had the same problem. Once you have cleaned out all the rubber you will need to carefully cut away the plastic supports in the handles and then epoxy these in place.
https://www.amazon.com/DMT-D8F-Dia-Sharp-Continuous-Diamond/dp/B0009H5C5M?th=1https://www.amazon.com/DMT-D8F-Dia-Sharp-Continuous-Diamond/dp/B0009H5C5M?th=1 This is made for the 8" continuous stone made by DMT. Print this with the knife…
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
ski wax scraper sharpener for use with Makita RT0700 or similar router. Uses a 6mm cutting tool. This tool can be used to sharpen your scraper. It removes 0.1mm from the scraper and leaves a sharp edge. Perfect for scraping wax from ski…
Holds a Pencil sharpener on a French Cleat wall
This project was made in collaboration with @Vyrus_Vlad Lesson Plan and Constraints: We have been tasked to create a 3D-printed object that would be useful in classrooms to make things easier or just decorate. Summary / How to: If you are…
The container of my pencil sharpening machine has broken. I have therefore developed a replacement. Please see picture of the measurements! Best printed in clear PETG, but I just had black one at home.
Just a hook for the Fällkniven C10 ceramic sharpener. You can screw in an SHCS M3x35 screw to strenthen the hook, but it is completely optional. Use a strong double-sided tape to moult in on the wall.
Diamond Sharpener Holder — 5-Slot Organizer A simple and compact holder designed to store up to 5 diamond sharpening sticks in one place. Keeps your sharpeners organized, protected, and always within reach on your workbench. 🖨 Print…
This is a cylindrical container that an M+R Pollux pencil sharpener can be slotted into. Printed in PLA with the following settings: Nozzle diameter: 0.4mm Layer height: 0.2 50% line infill (for sturdiness, less infill might work as well)…
I have bought a dozen or more diamond sharpening stones and they all seem to have the same dimensions, so I made this box to hold the 6 grits I use to get that near razor sharp edge before a strop is applied making a truly scary sharp…
I design a desk shaperner easy to assemble. In this case you have the files to print the pet pattern, but you can find others design on my patreon, likes Naruto or Leyend of Zelda themes. If you’d like to sell prints of this model, I…
Sharpening stone holder for openGrid using the openConnect connector. The holder was designed using mitufy's openConnect - General Holder Generator , it's designed to hold eight stones. It is designed to hold my “diamond” stones, I…
This is a Remix of V-Labs Knife sharpener for better Printability and M4 instead of M5 hardware. All the holes and Cavities for bolts and Nuts are modified for printability and M4. The tolerance of the swivel is decreased to .2mm. I added…
Made this to hold the cheap but effective SATC Premium Diamond Sharpening Stone that you can find on Amazon. It's the 400/1000 grit plate. The measurements on amazon say it's 7.8 by 2.75inches, but it's a little off. I made this so that i…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
Simple but sturdy base, better ergnomics than just a flat plate on a desk. I added some rubber feet to prevent slipping but double sided tape should work in a pinch. Regular PLA 3 walls 15% infill
pencils max size: 8 mm pencil eraser size: 19mm x 14mm pencil sharpener magnet size: 6 mm (printed with supports)
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
I made this to hold the included stones and to hold the allen wrench. I printed with PET-CF17, with default 15% infill, etc. I made it so it would work if you had screws mouting the platform or no screws. I only use this occasionally and…
Hello! I appreciate Mr. Vitaly12 for the idea that has helped improve this project. Usually, I tend to over-engineer things, but this jig is designed for stones with a thickness of 60mm. I based the measurements on the PARKSIDE stone…
Can also be used as a drying stand for plates after cleaning. The fcstd file can be opened in FreeCAD and contains a spreadsheet for you to easily modify this model to fit your plates and available magnets. Lapping plate holder that…
Sharpening Station for Sharpal Diamond Stone and Strop A compact and practical 3D-printed holder designed to keep your Sharpal diamond sharpening stone and leather strop neatly organized and stable during use. This model was created to…
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
Partners: I worked with @VanyaNar_3771481 and @FestiveAxis5_3775769. You can go check out their pages to find the rest of the set for the Wii-themed office supplies. Problem Statement: Recent analysis by the Staples finance department has…
This is a jig to hold a saw sharpening file at the correct angle when sharpening a woodworking handsaw (not a chainsaw). I have done versions 0, 5, 8, 15 & 20 °. I used a 3mm heat insert and 15mm M3 bolt to hold the file
This is a cylindrical container that an M+R Pollux pencil sharpener can be slotted into. Printed in PLA with the following settings: Nozzle diameter: 0.4mm Layer height: 0.2 50% line infill (for sturdiness, less infill might work as well)…
To simplify the use of the Knife Sharpener, I designed a storage container for the whetstone. It allows you to store the whetstone and soak it before use. Additionally, the Knife Sharpener can be placed on top. To prevent leaks, proper…
A simple and functional pencil sharpener designed for reliable everyday use. This model is optimized for easy 3D printing and clean results, making it a great quick project for both beginners and experienced makers. 🔧 Features Works like…
This tool for uniform pencil sharpening designed for standard 7 mm hexagonal pencils, but also can be used for sharpening pencils with similar size and other shapes (circle, triangle, etc). Tool don't need supports for printing. You can…
ski wax scraper sharpener for use with Makita RT0700 or similar router. Uses a 6mm cutting tool. This tool can be used to sharpen your scraper. It removes 0.1mm from the scraper and leaves a sharp edge. Perfect for scraping wax from ski…
I created this holder to fix my SHARPAL Diamond stone on a wooden based, this allows me to have multiple sharpening stones aligned on the same base. This holder has two 3mm diameter holes 100mm a part to hold it in place. I printed it for…
Ich habe eine Winkelblock für Rollschleifer mit einem 20° Winkel gemacht, da ich nur einen mit 15° habe und manche Messer besser mit einem 20° Schliff funktionieren. Es werden vier Magneten am besten N52 2 Stück 10x5 und 2 Stück 8x3…
Storage bins for up to 6 sharpening plates
Horl 3 Premium Organizer & Sharpening Station Streamline your sharpening workflow with this custom-designed holder for the Horl 3 Premium knife sharpener. This station is engineered to keep your workspace organized and efficient, ensuring…
Template for sharpening lathe chisels. Used to adjust the distance between the guide bar and the grinding wheel. For example, for a Tormek grinder.
Use high resolution for printing to eliminate steps on wedge. Needs support under the relieved area. A better way of printing a smooth slope is to use smooth PEI plate and print with the slope on the plate.
EN I found this model on makerworld and changed the design to match it with Makita equipment https://makerworld.com/de/models/434992-drill-bit-sharpener#profileId-339921 You should use supports for the big Overhang in the middle and the…
An Over complex dremel drill bit sharpener and more from scratch I've always been frustrated with sharpening my drill bits because I didn't have the right tools to do it properly. So I made my own system using a Dremel and whatever I had…
This gear was made with the help of STLGears.com I chose a spur gear with these design parameters. The circular hole is just to know where the center is. I then import the file, scaled for the proper diameter…
Just a stand to store the grinding wheel for the MR 13 A, B, or G drill sharpener Vevor Juste un support pour stocker la meule des affuteuse de foret MR 13 A ou B ou G Vevor
I design a desk shaperner easy to assemble. In this case you have the files to print the pet pattern, but you can find others design on my patreon, likes Naruto or Leyend of Zelda themes. If you’d like to sell prints of this model, I…
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
