Lennart Alignment Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is a simple clip model I created to hold multiple Ikea Lennart drawer units together. This simply clips around the frame of two units and aligns front/back, and makes the space between units nice and consistent.
Four clips are enough to hold two Lennart units together (one on top/bottom, both front/back) but you can also go overkill like I did and use as many as you like ;)
I've included the step file (I prefer the quality) instead of the print profile, so you will have to slice on your own.
Model was printed with (3) perimeters, 15% infill, and 0.16mm layer height, but these are just my normal defaults. Feel free to deviate as you see fit. No supports are required.
Model was printed in PETG (that's what I usually print) for the strength, flexibility and slippery-ness. I have not tested in PLA, but the model tolerances are not so tight that it might work. Test at your discretion.
Hope someone finds this useful