FAT-BOY Raspberry Pi Handheld
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very "special" Raspberry Pi handheld based off the 5 Inch DSI screen from Waveshare.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
A very "special" Raspberry Pi handheld based off the 5 Inch DSI screen from Waveshare, a Pi 4, joycons and a few other choice bits.
It's a chonker, thus the name, but if you happen to find the following parts you can make one too:
- 5" Waveshare DSI display (the 4x3 aspect one)
- Mono audio amp from Adafruit and 3.5mm plug and a teeny tiny speaker
- DFRobot USB power boost board
- two (YES TWO) 1850 lipo batteries
- joycon rails from the joycon adapter thingos
- a big power switch (can't remember exact size but you can rough it)
- access to a 3D printer and some screws, soldering iron and wires.
I am not responsible for any injury to either your mental or physical health.
If you make this, feel free to sell it on the street in a trenchcoat for all I care, I have zero confidence in the selling power of this design. I have made it a couple of times and used it for a little while before becoming frustrated with the joycon pairing process in Android. But it works. Highly recommend using android for compatibility!