Black & Decker 20V MAX Regular Magnetic Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic battery holder for Black and Decker Rechargeable batteries and charger. Requires 12 8x4mm neodymium magnets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of MyStoopidStuff's excellent holder. It now has holes in the back for placing magnets. You need 12 8 mm diameter by 4 mm thick neodymium magnets. These can be press fit into the model, although it may require a fair bit of force to push them in. I would recommend gluing them in place permanently to ensure the magnets stay in. If placed on a perfectly flat metal surface it should stick with both the battery and the charger on it. If it is not sitting perfectly flush, because the surface of the metal is slightly convex, or the metal is thin and slightly warped, it may slide down.