Fuse holder - 20mm fuses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic fuse holder for 20mm fuses. Holds 10.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Fuse holder for 20mm fuses. Holds 10 fuses.
I am using this for spare fuses for my guitar amp. I've included a version with pegs that fit in the holes on the back of the amp, so it locks in without adhesive. Specifically, this is an EVH 5150 III EL34 amp, with 3/16" holes spaced ¼" apart on center.
The regular version just has a flat back (no pegs), so you can use something like double-sided tape if you want to mount it.
I recommend PETG with 5 perimeters for the right strength and stiffness. For the peg version, you'll need supports on the pegs only. No supports needed otherwise.