1 / 6
Artillery Sidewinder X4 Extruder Cover One sided Cooling — zdjęcie 1
1 / 6

Artillery Sidewinder X4 Extruder Cover One sided Cooling

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Re-idesigned the cover for better performance.

Ocena
0 / 5
Polubienia
14
Pobrania
214
Wydruki
0
Wyświetlenia
776
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The original cover suffocates the extruder from air causing it to overheat overtime.

It does not use the 5015 blower fan to its full capabilities due to the poor airduct design.

My design allows the full hotend assembly to breathe and the extruder can get fresh air as the head moves on the X carriage.

The ducting for the fan allows to use it to its full potential, or later to be changed for a higher performance 5015 fan if needed.

Also with the one duct design now you can see what the nozzle is doing during the print as the right side is open.

You can see the difference in cooling capabilities between  the two towers(the same gcode was used for them)

I plan to add more designs, but it takes a lot of time to develop.

Printed from PLA, but it can be printed from what ever you like.

Filament: Esun Basic White PLA

Layer height: 0.2

Printspeed: 150mm/s

Nozzle: standard brass 0.4mm

Tagi