Artillery Sidewinder X4 Extruder Cover One sided Cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Re-idesigned the cover for better performance.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 216
- Makes
- 0
- Views
- 781
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
The original cover suffocates the extruder from air causing it to overheat overtime.
It does not use the 5015 blower fan to its full capabilities due to the poor airduct design.
My design allows the full hotend assembly to breathe and the extruder can get fresh air as the head moves on the X carriage.
The ducting for the fan allows to use it to its full potential, or later to be changed for a higher performance 5015 fan if needed.
Also with the one duct design now you can see what the nozzle is doing during the print as the right side is open.
You can see the difference in cooling capabilities between the two towers(the same gcode was used for them)
I plan to add more designs, but it takes a lot of time to develop.
Printed from PLA, but it can be printed from what ever you like.
Filament: Esun Basic White PLA
Layer height: 0.2
Printspeed: 150mm/s
Nozzle: standard brass 0.4mm
