Vex Versaplanetary gearbox 90 degree drive cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a cover for the 90 degree versaplanetary drive kit from Vex Robotics. I designed and printed this to cover the exposed bevel gears. The case slides on from the side and then there are holes so you can put a bolt in and secure it. I recommend you install the 90 degree gearbox first and then snap off two of the tabs to let the case clear the mounting bolts (the picture has a mounting bolt clamping on the case, this is wrong. I will try and upload a correct picture). You only should have one bolt holding the cover on, and it should not be on of the bolts holding the gearset together.
I recommend printing in the orientation in the pictures with support enabled.
I posted the sldprt as well as the stl in case you want to modify the design at all
Print instructions
Category: Robotics